KWA SR-12 Feeding issues

Go down

KWA SR-12 Feeding issues Empty KWA SR-12 Feeding issues

Post by Doc on January 15th 2012, 11:05

I have determined that the feeding issue with my KWA SR-12 is NOT a hop up one. Which means it must be a gear box problem. Anyone familier with reasons a air nozzle would not clear the BB ramp on the hop up when cycling? it occurs both on semi and full auto.
Sad Panda Sad
Doc
Doc
Doc
Staff Sergeant E-6

Posts : 209
Age : 30
Location : Fort Collins, CO

Back to top Go down

KWA SR-12 Feeding issues Empty Re: KWA SR-12 Feeding issues

Post by Tango on January 15th 2012, 16:29

Well Pad Sanda, I can think of one that is most likely. The air nozzle is no longer engaged by the Tappet Plate. Otherwise it would be a hop issue which you have said it isn't.

Tango
First Sergeant E-8

Posts : 682
Age : 33
Location : Westminster, CO

Back to top Go down

KWA SR-12 Feeding issues Empty Re: KWA SR-12 Feeding issues

Post by Doc on January 15th 2012, 23:20

I was incorrect. The hop up ramp was deformed slightly. I sanded it down a bit and it feeds much better. still a bit temperamental, but at least it shoots now.
Doc
Doc
Staff Sergeant E-6

Posts : 209
Age : 30
Location : Fort Collins, CO

Back to top Go down

KWA SR-12 Feeding issues Empty Re: KWA SR-12 Feeding issues

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum